- Kkl Va Com 409 1 Download
- Kkl 409.1 Windows 10
- Kkl 409.1 Usb Driver
- Kkl 409.1 Software Download
- Vagcom Usb Kkl 409.1
- Kkl Driver For 409.1
Express VPN Best for privacy. Number of IP addresses: 30,000 Number of servers: 3,000+ 3 months free with 1-year plan. I don't expect much help here, but want to support Ross Tech if at all possible. Please, bear with me. There is a open source Subaru diagnostic/data logging program called ecuExplorer. It requires a vag-com cable KKL 409.1 (from what I gather) I currently have a Hex+CAN cable (legit, as I registered it here) I have a couple of questions.
This article will guide you how to correctly install VAG-COM 409.1 KKL USB cable on Windows and VCDS software.
|
- VAG - INFO: This download folder is for experimental purposes only. Use the software and information at your own risk We share all information we have, please inform us about your experience or if you found something what is not correct.
- Kkl Vag Com 409.1 Driver for Windows 7 32 bit, Windows 7 64 bit, Windows 10, 8, XP. Uploaded on 2/5/2019, downloaded 423 times, receiving a 83/100 rating by 208 users.
STEP 1: Download and Install VAG-COM KKL 409.1 Drivers
(DO NOT connect cable to your computer yet. Only do this when you're instructed below.)
Start by downloading the VAG-COM Driver Pack 1.
Here's how to install on different Windows versions..
Kkl Va Com 409 1 Download
Windows Vista, 7, 8, 8.1, 10:
Uncompress the file. Double-click on 'Install.exe' to install the drivers. When complete — plug in cable into any USB port on your computer and wait for automatic installation to complete.
If install is successful, move onto Step 2.
If installation fails, see below: Troubleshooting: If Drivers Failed To Install
Windows XP:
- Uncompress the file. Double-click on 'Install.exe' to install the drivers.
- Plug cable into any computer's USB port.
- 'Found New Hardware Wizard' will start and it will ask you 'Can Windows connect to Windows Update to search for the software?'. Select 'Yes'.
- Select 'Install the software automatically'.
- After the installation is complete, click 'Finish'.
- 'Found New Hardware Wizard' will start once again because there are two drivers for this cable.
- Go through the same steps as explained above to install this second driver.
If install is successful, move onto Step 2.
If installation fails, see below: Troubleshooting: If Drivers Failed To Install
Troubleshooting: If Drivers Failed To Install:
Installation failed? Download here VAG-COM Driver Pack 2.
Unextract the file into any folder. Then while your cable is connected to the computer — go Device Manager.
- Windows Vista/7/8/10: Control Panel » System » Device Manager
- Windows XP: Control Panel » System » 'Hardware' tab » Device Manager
You'll see a device similar to 'USB Serial Port' under either 'Other devices' or 'Ports (COM & LPT)'.
Right-click and choose 'Update Driver Software'. Like this:
Then select the location where you unextracted Driver Pack 2. Let it install.
STEP 2: Discover Port Number that VAG-COM KKL Cable is Using
Go to Control Panel.
- Windows Vista/7/8/10: Control Panel » System » Device Manager
- Windows XP: Control Panel » System » 'Hardware' tab » Device Manager
Expand 'Other devices' or 'Ports (COM & LPT)'. Whichever contains 'USB Serial Port'.
Next to 'USB Serial Port' — you'll see a number.
If the COM port number is between 1-4, then everything is fine. Move onto Step 3.
If the COM port number is above 4, then we'll have to change it so it's between 1-4. Here's how..
Right-click on 'USB Serial Port' and click on 'Properties' — as per below pic: Then:
That's it! Now let's test if everything is working. Move onto next step below.. |
Cable should be plugged into computer.
Kkl 409.1 Windows 10
- Start VCDS-Lite software.
- Click 'Options' button.
- You will see 'Select COM Port' box. Select the 'COM Port' number as explained in Step 2.
- Click the ‘Test’ button.
- If everything is good, it should display 'Interface Status: Found!'.
- You can now connect other end of cable to car. Turn on ignition. And you're ready to start diagnosing!
Extensis suitcase fusion 4 serial number for mac. If test is not successful — check the following:
- Other software or devices using USB ports or that same COM Port could be conflicting. You should uninstall the suspected software or device for troubleshooting this problem.
- It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System.
- Cable must be plugged into the vehicle with ignition ON.
- Test the cable with each COM Port from 1 to 4 in Windows Device Manager.
- Make sure that the driver is installed and configured as explained in Step 1.
More Troubleshooting Tips:
- Only Audi, Volkswagen, Skoda and Seat vehicles are supported. Other brands will only work for generic OBD-II functions.
- If VAG-COM 409.1 KKL cable doesn't connect — or if you get the error message 'Can't Synch Baud Rate' — then go to Options and set Start Baud to 9600. If 9600 doesn't work, try 4800 and 1200. Turn the vehicle's ignition OFF and back ON after each failed attempt to connect.
- If you have installed VCDS software before or from another source, uninstall all versions of VCDS software right now, and delete directory 'C:Ross-Tech'. Then install latest version of VCDS-Lite software by clicking here.
For further information and instructions for troubleshooting, visit the following links:
How to Install & Register VCDS-Lite software That Came With Your VAG-COM 409.1 KKL Cable
Kkl 409.1 Usb Driver
Posted by admin
'KKL' VAG-COM Compatible Interface: Windows 98/ME USB Driver Installation Interface setup is very straightforward, and comprises 3 stages: • Download the USB Drivers and the VCDS-Lite software • Install the USB drivers for the interface • Install and setup the VCDS-Lite software Stage 1: Download the USB Drivers and the VCDS-Lite software To get your interface up and running, you need to install software device drivers for the USB interface, and the VCDS-Lite software itself to connect to the car. You can download them from the following locations: USB Device Drivers: VCDS-Lite: Save both of these in a folder on your computer. You will need to come back to it to run the VCDS-Lite installer later. Stage 2: Install the USB drivers for the interface Note: screenshots shown from Windows 98 - Windows Millennium Edition may look slightly different, but the process will be the same. If you are on Windows 2000 or later, you need different drivers - please see the guide that came with your interface cable. Ralink 3070 Driver Windows 10. • Important: Do NOT plug the USB interface into your PC yet - you need to install the software drivers first!
Asus P5g41c M Lx Drivers For Windows 10. Broadcom 802.11 Driver Windows 10. 'KKL' VAG-COM Compatible Interface: Windows 98/ME USB Driver Installation. Stage 1: Download the USB. Select 'Search for the best driver for your device.
Kkl 409.1 Software Download
Vagcom Usb Kkl 409.1
• Browse to the location where you downloaded the files, and double-click on the vagusb98.exe file to begin the driver installation process. You should then see the following screen. • Select 'Search for the best driver for your device (Recommended)' as shown below and then click ' Next' • Make sure only 'Specify a location:' is ticked, then click 'Browse' and browse to the C: Windows Desktop VAG USB Drivers folder. Then click Next • Windows will then search the folder for a suitable driver, and should come back with the message as below.
Kkl Driver For 409.1
Epson Nx430 Drivers Windows 10▶